
Undress
- Registriert
- 07.06.04
- Beiträge
- 999
- Reaktionen
- 24
- Punkte
- 1.336
Hallo [g=79]Homerecordler[/g]!
Ich habe mir zu meinem Geburtstag das hier oft empfohlene "Mixing Engineers Handbook" schenken lassen. Jetzt hab ichs auch schon durchgelesen und finds auch echt subber. Mein Englisch ist an und für sich auch nicht schlecht, sprich ich hab 90 % verstanden.
Jetzt gibts da im Kapitel "Compression" den sog. "New York Compression Trick", welchen ich zu gerne auch mal ausprobieren würde.
Das Problem ist, dass ich nicht verstehe, wie ichs bewerkstelligen soll.
Darum wäre ich sehr, sehr, sehr dankbar, wenn mir jemand helfen könnte, diesen Trick in Cubase SL umzusetzen/ zu übersetzen!
Hier kommt der Text aus dem Buch (dann sparen sich manche gleich das Geld fürs Buch
):
1) Buss the drums, and maybe even the [g=118]bass[/g], to a stereo [g=322]compressor[/g]
2) Hit the [g=322]Compressor[/g] fairly hard, at least 10db or more if it sounds good (ist damit die "[g=105]gain[/g] reduction" oder "threshold" gemeint??)
3) Return the output of the [g=322]compressor[/g] to a pair of fader inputs on the console (hoffentlich gehts auch ohne
)
4) Add a pretty good amount of high end and low end to the compressed signal
5) Now bring the fader levels of the comressor up until its tucked just under the present rhythm section mix to where you can just hear it.
Also, falls mir jemand sagen kann, wie ich das in Cubase hinkrieg, dann umarme ich ihn virtuell und überhäufe ihn mit Dankbarkeit
!!!
Viele Grüße, Undress.
Ich habe mir zu meinem Geburtstag das hier oft empfohlene "Mixing Engineers Handbook" schenken lassen. Jetzt hab ichs auch schon durchgelesen und finds auch echt subber. Mein Englisch ist an und für sich auch nicht schlecht, sprich ich hab 90 % verstanden.
Jetzt gibts da im Kapitel "Compression" den sog. "New York Compression Trick", welchen ich zu gerne auch mal ausprobieren würde.
Das Problem ist, dass ich nicht verstehe, wie ichs bewerkstelligen soll.
Darum wäre ich sehr, sehr, sehr dankbar, wenn mir jemand helfen könnte, diesen Trick in Cubase SL umzusetzen/ zu übersetzen!
Hier kommt der Text aus dem Buch (dann sparen sich manche gleich das Geld fürs Buch
1) Buss the drums, and maybe even the [g=118]bass[/g], to a stereo [g=322]compressor[/g]
2) Hit the [g=322]Compressor[/g] fairly hard, at least 10db or more if it sounds good (ist damit die "[g=105]gain[/g] reduction" oder "threshold" gemeint??)
3) Return the output of the [g=322]compressor[/g] to a pair of fader inputs on the console (hoffentlich gehts auch ohne
4) Add a pretty good amount of high end and low end to the compressed signal
5) Now bring the fader levels of the comressor up until its tucked just under the present rhythm section mix to where you can just hear it.
Also, falls mir jemand sagen kann, wie ich das in Cubase hinkrieg, dann umarme ich ihn virtuell und überhäufe ihn mit Dankbarkeit
Viele Grüße, Undress.