
Realist
Moderater
Teammitglied
- Registriert
- 30.09.08
- Beiträge
- 14.825
- Reaktionen
- 8.234
- Punkte
- 39.881
Ich habe es nur überflogen, meine aber, dass man das im Setup einstellen kann/muss.Das stimmt, danke, nur ob ADAT ausreicht zum synchronisieren lese ich nicht heraus.
Welches Routing und Setup eingestellt ist, müsste dann über die LED's ersichtlich sein.
Siehe Manual:
Setup buttons and LED - These buttons are used to modify all settings on the DA-16X. In general, setting
modification is accomplished by :
a) enabling Setup mode by pressing any of the 4 buttons (the Setup LED will light and one parameter
value will flash);
b) using the PREV or NEXT buttons to scroll to the parameter to be modified;
c) using the UP or DOWN buttons to select the desired parameter value.
After Setup mode is enabled, pressing the PREV or NEXT button will cycle through the DA-16X’s seven
parameters - CLOCK SOURCE, SAMPLE RATE, WC ratio, OPTICAL format, AES format, INPUT and CAL
mode- and then return to the first parameter. Likewise, pressing the UP or DOWN buttons will cycle through
the values available for the selected parameter. Once a value is selected, it immediately becomes active,
regardless if the LED is flashing to indicate that Setup mode has been enabled.