Information ausblenden

NAMM2015: Arp Odyssey wiederbelebt– Korg macht's möglich

2-stimmiger Synthesizer neu aufgelegt und auf 86% geschrumpft<!--namm-2015-->


Die Älteren werden ihn noch kennen: ARP gehörte einst zu den kultigsten Synthesizer-Firmen der Siebziger Jahre. Korg hat nun nicht nur die Namensrechte erworben sondern erfreulicherweise den Odyssey wieder aufgelegt.

[​IMG]


Der bis 1981 gebaute Synth wurde unter Mitwirkung des damaligen Mitgünders David Friend neu designed und um die Segnungen moderner Synzjesizer-Produktion erweitert. Bemerkenswert ist hier vor allem die Rekonstruktion der Arp-typischen Slider.


//www.youtube.com/embed/w8MIrdv1hAE

Spezifikation:

Tatstaur: 37 Tasten ohne Velocity und Aftertouch
Polyphonie: 2 Stimmen im Duophonic-Modus, sonst monophon
Controller: Transpose 2 Octaven, Pitch Control, Modulation)
Noise Generator (white and pink)
Portamento: ab 0.01 msec./oct
Minimum Speed: bis 1.5 sec./oct
VCO (Voltage Controlled Oscillator): Sawtooth, Square, Pluse (Dynamic Pluse)
Frequency Range: VCO-1 in low freq. mode, 0.2 Hz – 20 Hz: VCO-1 and VCO-2 (audio range) about 20 Hz – 20 kHz
Warm Up Drift: 1/30 semitone from turn on max
Pulse Width: 50 % – 5 %
Pulse Width Modulation: ADSR, +45 %; LFO, +15 %
Voltage Controlled Response: 1 V/oct
Maximum Frequency Shifts: LFO sin wave, +1/2 oct.; LFO square wave, +1.5 oct.; ADSR, +9 oct.; S/H, +2 oct.
* VCO-1 is low note priority, VCO-2 is high note priority.
VCF (Voltage Controlled Filter): Types: Low pass (I: 12 dB/oct., II III: 24 dB/oct.)
Frequency Range: 16 Hz – 16 kHz
Maximum Usable Q: 30
Resonance: 1/2 – self oscillate
Voltage Controlled Response: C3 key (left edge): 0 V, C6 key (right edge) 3 V
VCA (Voltage Controlled Amplifier): Dynamic Range: 80 dB
Ring Modulator:
Type: Digital
Input Signal: VCO-1, VCO-2 (square wave)
Sample & Hold:
Command Sources: Keyboard or LFO trigger
Sampled Signals: VCO-1 sawtooth wave and square wave, VCO-2 square wave and pink noise
ADSR Envelope Generator:
Attack Time: 5 msec. – 5 sec.
Decay Time: 10 msec. – 8 sec.
Sustain Level: 0 – 100 % or Peak
Release Time: 15 msec. – 10 sec.
AR Envelope Generator:
Attack Time: 5 msec. – 5 sec.
Release Time: 10 msec. – 8 sec.
Control Input Jacks:
Pedal: ?6.3 mm monaural phone jack
Portamento Foot Switch: ?6.3 mm monaural phone jack
Audio Output Jacks:
LOW:
Connector: ?6.3 mm monaural phone jack
Maximum Output Level: -20 dBu@ 10 k? load
Output Impedance: 10 k?
HIGH:
Connector: XLR connector
Maximum Output Level: +4 dBu@ 1 k? load
Output Impedance: 330 ?
Headphones Jack:
Connector: ?6.3 mm stereo phone jack
Maximum Output Level: 50 mW + 50 mW@ 33 ? load
Output Impedance: 10 ?
* Controllable by volume knob.
External Audio Input (Ext Audio Input) Jack:
Connector: ?6.3 mm monaural phone jack
Maximum Input Level: -10 dBu
Input Impedance: 22 k?
MIDI Connector:
IN
USB Connector:
Type B
CV IN/OUT Jacks:
Keyboard CV (IN/OUT): 1 V/oct.
Connector: ?3.5 mm monaural phone jack
GATE IN/OUT Jacks:
GATE IN: +3 V (minimum)
GATE OUT: +10 V, key down; 0 V all keys up
Connector: ?3.5 mm monaural phone jack
TRIG IN/OUT Jacks:
TRIG IN: +3 V pulse min., 10 ?sec. Duration minimum
TRIG OUT: +10 V pulse on key depression, 10 ?sec. Duration
Connector: ?3.5 mm monaural phone jack
Power Supply: AC adapter jack (DC 9 V)
Power Consumption: 6.5 W
Dimensions (W x D x H): 502 x 380 x 120 mm / 19.76″ x 14.96″ x 4.72″
Weight: 5 kg / 11.02 lbs
Accessories:
AC adapter, phone cable, mini-phone cable, owner’s manual, dedicated semi-hard case
Options:
VP-10 Volume Pedal, PS-1/PS-3 Pedal Switch

Der Preis wird derzeit mit ca. $US 1.400 angegeben.

Weitere Infos auf der ARP-Site
http://www.arpsynth.com/en/arpodyssey/